Actiontec-electronic Actiontec Wireless DSL Gateway GT704WG Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 123
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
36
Actiontec 54 Mbps Wireless DSL Gateway User Manual
37
Chapter 5 Configuring Advanced Settings
The values in the “Modem IP Address and “Modem Subnet Mask text boxes are
the IP and subnet mask address of the Gateway as seen on the network. These
values can be modified for your LAN network, but Actiontec recommends keep-
ing the default factory settings (IP address 192.168.1.1; subnet mask address
255.255.255.0).
Note: If the Gateway’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see DHCP Server Configuration.
When finished in this screen, click Apply to activate any changes made.
WAN IP Address
Selecting WAN IP Address in the Advanced Setup screen causes a warning
screen to appear.
Read the on-screen warning, then click Yes to continue.
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 122 123

Comentarios a estos manuales

Sin comentarios