Actiontec-electronic Actiontec Wireless DSL Gateway GT704WG Manual de usuario descargar pdf (Pagina 26)

Actiontec 54 Mbps Wireless DSL Gateway User Manual

Chapter 5 Configuring Wireless Settings

Basic Wireless Setup

To perform a basic setup of a wireless network using the Gateway:

1. In the “Wireless Basic Settings” screen, turn the Gateway’s wireless radio on by

selecting On.

2. Create a name for the wireless network and enter it in the “ESSID” text box.

3. Select a channel from the “Channel” drop-down menu. In the United States,

use channels 1-11.

4. Activate WEP (Wired Equivalent Privacy) to secure the wireless network by

selecting WEP.

5. Create a 64-bit WEP key by selecting 64-bit WEP Key from the “select a WEP

Key” drop-down menu, then entering a 10-digit key in the “Key Code” text

box. The digits can be any letter from A-F, and any number from 0-9.

6. Write down the Gateway’s wireless settings. To connect other devices to the

wireless network, the devices’ wireless settings must match the Gateway’s wire-

less settings exactly. Check the “Current Wireless Status” box (available in any

wireless setting screen) to view the Gateway’s wireless status and settings.

Wireless Advanced Settings

To access the Gateway’s wireless advanced settings screens, select Advanced

Settings from the menu on the left side of the “Wireless Basic Settings” screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 122 123

Sin comentarios

Actiontec-electronic Actiontec Wireless DSL Gateway GT704WG Manual de usuario Pagina 26